Function:
It is mainly used for accelerated corrosion tests of materials in outdoor environments where salt water splashes or seawater comes into contact. This equipment replicates the most natural conditions, simulating scenarios commonly encountered in the natural environment and subjects itself to rigorous self-testing under conditions several times harsher than natural environments, such as salt spray, dryness, humidity, room temperature static conditions, etc. It can perform tests in any order or individually.
Major Specifications:
|
型号 |
CZ-1000D |
CZ-1600D |
CZ-2000D |
|
Inner size (WxHxD)(cm) |
1200x800x1000 |
1600x800x1000 |
2000x800x1000 |
|
Outer size (WxHxD)(cm) |
2250x1720x1220 |
2950x1720x1220 |
3550x1900x1220 |
|
Test lab temperature |
20°C~70°C |
||
|
Saturated barrel temperature range |
RT~70°C |
||
|
Humidity range |
20%~98%RH |
||
|
Salt spray volume |
1~2ml/ (h•80cm2) (collect for at least 16 hours and take the average value) |
||
|
Spray pressure |
70~170KPa |
||
|
Sample placement angle |
20°+5° |
||
|
Rapid alternation of dry and wet salt spray |
Salt spray test 1min~99H can be set arbitrarily:
Drying test 1min~99H can be set arbitrarily: Wet heat test 1min~99H can be set arbitrarily: |
||
| Spray pattern | Continuous spray, periodic spray, circulating spray, optional | ||
| Control accuracy | Temperature deviation: ±2.0°C;
Temperature deviation: ≤+2-3%R.H when ≥75R.H; Humidity deviation: ≤±5%R.H when <75%R.H; |
||
| Box material | Inner titanium plate, outer stainless steel plate with paint | ||
| Cooling method | Water Cooling | ||
| Control System | Siemens PLC+Siemens temperature module+human-machine interface | ||
| Power supply conditions | AC380V 50Hz (60Hz custom) three-phase four-wire + protective grounding | ||
Product Details：
Test Standards:
1）DO160 E/F/G Salt Spray Test Requirements
2）GB/T20854-2007/ISO14993-2001 Corrosion of Metals and Alloys – Accelerated Testing Involving Cyclic Exposure to Salt Mist, “Dry” and “Wet” Conditions
3）GB/T24195-2009/ISO 16151:2005 Corrosion of Metals and Alloys – Accelerated Cyclic Tests with Exposure to Acidified Salt Spray Dry and Wet Conditions
4）GJB150.11A-2009 Laboratory Environmental Test Methods for Military Material – Part 11: Salt Fog Test
5）GB/T 2424.17-2008/IEC60068-2-11:1981 Environmental Testing for Electric and Electronic Products – Part 2: Tests – Test Ka: Salt Mist
6）GB/T 2423.18-2012/IEC 60068-2-52:1996 Environmental Testing – Part 2: Test Methods – Test Kb: Salt Mist, Cyclic (Sodium Chloride Solution)
7）GB/T2423.3-2006/IEC6008-2-78-2001 Environmental Testing for Electric and Electronic Products – Part 2-78: Tests -Test Cab: Damp Heat, Steady State, IDT)
8）GB/T10125-2021/ISO9227:2017 Corrosion Tests in Artificial Atmospheres – Salt Spray Test
9）GB/T 31467.3-2015 Lithium-ion Traction Battery Pack and System for Electric Vehicles – Part 3: Safety Requirements and Test Methods: Salt Spray Test
10）GB/T 5170.8-2008 Inspection Methods for Environmental Testing Equipment for Electric and Electronic Products – Salt Spray Test Equipment
11）GB/T 10587-2006 Specification for Salt Mist Testing Chambers
12）GB/T 10586-2006 Specifications for Damp Heat Testing Chamber
Inner box | Details:
Controller | Details
Reviews
Clear filtersThere are no reviews yet.