Equipment Function and Principle:
The salt spray corrosion environment simulation laboratory can simulate typical natural environmental conditions at any time, regardless of time or season. Through salt spray corrosion testing, it accelerates the analysis of defects in metals and their alloys, metal coatings (anodic and cathodic), conversion coatings, anodic oxide coatings, and organic coatings on metal materials, thereby verifying product stability and reliability. By performing environmental simulation tests on products in the laboratory, replacing the actual operating environment with a simulated environment, this can save significant manpower and material resources, saving research and development funds. Furthermore, environmental simulation tests are based on and control the product’s operating conditions. The “accelerated” nature of the tests can shorten product testing cycles.
Product Details:
Major Specifications:
| Product Name |
Walk-in composite salt spray test chamber |
| Product Model |
CZ -80KD |
| Sample limit |
This test equipment is prohibited from: Testing or storing samples containing flammable, explosive, or volatile substances; Testing or storing samples containing corrosive substances; Testing or storing biological samples; Testing or storing samples containing strong electromagnetic radiation sources; Testing or storing samples containing radioactive substances; Testing or storing samples containing highly toxic substances; Testing or storing samples containing highly toxic substances that may be generated during testing or storage; |
|
Nominal content |
78m³ volume without top sloping roof |
| Inner box size (mm) | 4000×3000×6500 WXH×D
Note: This does not include the top bevel height; if the top bevel angle is 110-115°, the bevel height is 1390mm. |
| Outer box size (mm) | Approximately 4250×4370×7850 WXHXD
Note: The outer box dimensions do not include the brine tank dimensions. The bottom of the device is sunken below the ground, and the bottom of the inner box is flush with the ground. Foundation is user-provided. |
| Brine tank size (mm) |
Approximately Φ900×H 950, capacity 500L |
| Brine preparation box size (mm) | 1260mm long, 500mm wide, 1000mm high, 500L capacity
Note: The brine preparation tank includes a top stirring motor, a stirring motor control button switch, a stirring timer, a pure water supply port, a water flow meter, a low water level sensor, and an automatic brine output pump. |
| Equipment bottom load |
≥1500kg/m uniformly distributed |
| Net weight of equipment |
About 13 tons (subject to actual weight) |
| power supply |
AC (380 ± 10) V (50 ± 0.5) Hz Three-phase four-wire + protective grounding |
Reviews
Clear filtersThere are no reviews yet.