Function:
This test equipment is mainly used for salt spray test machine exhaust filtration. During the use of the salt spray test machine, the exhaust gas discharged by the spray contains sodium chloride. Direct discharge to the outdoors will cause corrosion and damage to the metal materials around the exhaust port. In order to avoid losses caused by the use of the equipment, it is very necessary to install a salt spray filter outside the exhaust port.
Major Specifications:
| Product Name | Salt spray filter |
| Product Model | CZ-100PW |
| Outer box size (mm) | About 800×1000×600 W×H×D |
| Air inlet size (mm) | Ф90 |
| 排气口尺寸（mm） | Ф90 |
| Equipment Net Weight | About 90kg |
| Environmental conditions for use | Ambient temperature: +5～50℃ |
| Mist treatment capacity | 20m3/h (the actual exhaust volume of the equipment is about 15 m3/h) |
| Intake air salt concentration | 0～10% |
| Discharge salt concentration | ≤0.2% |
| Wastewater treatment | Wastewater treatment is discharged after dilution with clean water |
| Material | PVC board welding |
| Equipment air intake pipe connection | After the equipment arrives at the site, the user needs to connect the exhaust pipe of the salt spray test machine to the air inlet of the equipment. When using multiple devices, it is recommended to install a ball valve on the exhaust pipe of each device. When the equipment is not in use, close the ball valve to prevent exhaust gas from flowing back into the unused equipment. |
| Exhaust pipe connection | The equipment exhaust pipe must be connected to the outdoors, and the exhaust pipe extension pipe cannot have a U-shaped bend to avoid water accumulation inside the exhaust pipe, which will cause poor demisting. |
| Equipment water supply | The machine has 4 water supply pipe joints reserved. When installing, the tap water supply pipe needs to be connected to the equipment. The water supply pressure is required to be 0.2-0.4Mpa, and the water consumption is about 40L/day |
| Equipment gas supply | The required gas supply pressure is 0.4～0.8Mpa, and the gas consumption is about 2m3/h |
| Device power supply | AC220V,50HZ,maximum current 1A |
Product Details：
Controller | Details
Reviews
Clear filtersThere are no reviews yet.